Page 19
Installation Manual Pyramid Universal Dome Interface
DOME OPERATIONS AVAILABLE WITH THE PYRAMID 2 KEYBOARD
When in Menu mode on a Panasonic dome camera, it is possible to enter the Special menu by pressing the Iris
Close key.
After programming a preset on a Dennard Dome camera, press the Iris Open key to re-enable PTZ fuctionality.
On a JVC Dome camera, if the menu is exited by using the joystick, PTZ functionality will freeze. To overcome this,
re-enter the menu system by twisting the joystick anti-clockwise. Exit the menu system correctly by invoking Preset
128.
When entering text characters on a JVC Dome camera, ensure that Aux 1 is active (on) and twist the joystick
clockwise to enter characters.
Vicon
The Pyramid 2 Keyboard can be used to operate a Vicon dome camera menu system as follows:
Use the Preset 128 function to enter and exit Menu mode.
The Aux 1 soft-key is used to toggle between Menu and PTZ mode.
Move the joystick up and down to navigate up and down menus, and move it left and right to change menu values.
Zoom In (twist joystick clockwise) is used as the Enter function (i.e. to select menu items and to confirm values).
The Focus Near key is used as the Escape function.
Pelco
The Pyramid 2 Keyboard can be used to operate a Pelco dome camera menu system as follows:
Use the Preset 128 function to enter and exit Menu mode.
The Aux 1 soft-key is used to toggle between Menu and PTZ mode.
Move the joystick up and down to navigate up and down menus and also to select menu values.
The Iris Open key is used as the Enter function (i.e. to select menu items and to confirm values).
Sensormatic UltraDome II, III, IV, V, VI and AD DeltaDome II and III
The Pyramid 2 Keyboard can be used to operate a Sensormatic/AD dome camera menu system as follows:
Recall Preset 128 to enter the domes menu system.
The Focus Near key is used to make selections.
Move the joystick to navigate the menu system and selection lists.
Use the Zoom collar of the joystick to cycle entries in the selected field.
VCL, Mark Mercer
VCL and Mark Mercer dome cameras do not have a menu system.
Vista PowerDome
The Pyramid 2 Keyboard can be used to operate the menu system of a Vista PowerDome as follows:
Recall preset 128 to enter the menu system.
Enter the code 1 [preset], 2 [preset], 3 [preset], 4 [preset].
The joystick is used to navigate the menu system and selection grids.
Twist the zoom collar of the joystick clockwise to enter selections.
Twist the zoom collar of the joystick anti-clockwise to escape.
Enter Preset 128 to re-enable the joystick.
Baxall CDR and CDH Cameras
The Pyramid 2 Keyboard can be used to operate the menu system on a Baxall CDR or CDH camera as follows:
Recall preset 128 to enter the menu system.
Move the joystick up and down to navigate up and down menus, and move it left and right to change menu values.
Zoom In (twist joystick clockwise) is used as the Enter function (i.e. to select menu items and to confirm values).
(20 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales